Furuno 1824C-BB Installation Manual page 54

GPS SETUP menu description (con't from previous page)
Item
Fix Mode Choose position fixing method: 2D
(three satellites in view), 2D/3D (three
or four satellites in view whichever is
greater).
Cold Start Clears the Almanac to receive the latest
Almanac.
WAAS setup
Press the D: WAAS SETUP soft key at the GPS SETUP menu to show the WAAS SETUP
display.
Item
WAAS Mode Select ON to use the WAAS mode.
WAAS WAAS satellite can be searched
Search automatically or manually. For manual
search, enter appropriate WAAS satellite
number.
WAAS Alarm When the WAAS signal is lost, the
audible alarm sounds with the visual
message "NO WAAS SIGNAL."
On: Alarm continues to sound until the
WAAS positioning mode is available
again or the alarm is recognized by key
operation.
Off: Alarm sounds three times.
Corrections Selects the type of message for WAAS
Data correction. Use "00" (operational status)
in North America; "02" in other locations.
39. After you have finished setting up the GPS receiver, it's now time to set up external
equipment. Press the A: NEXT soft key to show the GPS/PORT menu. It is only
necessary to set up ports which you are going to use; skip unnecessary steps. If you
do not have external equipment connected to the NavNet, press the NEXT key
several times to show the "FINISH AND EXIT INSTALLATION WIZARD" screen and
then push the ENTER knob to finish.
OUTPUT FORMAT
LAT/LON FORMAT
OUTPUT DESTINATION NO
Installation wizard, GPS/PORT port setup
Description
Contents of WAAS SETUP menu
Description
NMEA0183
Ver 2.0
DD'MM.MMM'
Settings
2D, 2D/3D
No, Yes
Settings
On, Off
Auto, Manual
On, Off
00 to 27, 99
3-10
Default Setting
2D/3D
No
Default Setting
Off
Auto
Off
02