Furuno 1824C-BB Installation Manual page 40
Marine radar and color video plotter
Hide thumbs
Also See for 1824C-BB:
- Specifications (10 pages) ,
- Operator's manual (236 pages) ,
- Operator's manual (233 pages)
Table of Contents
Advertisement
DJ-1
For MODEL1824C-BB/1834C-BB/1934C-BB/1944C-BB/1954C-BB, remove the
waterproofing cap from the DJ-1 port on the processor unit and discard it.
GD-1920C-BB: Do not remove the waterproofing cap. Wrap the connector nut and cap with
vinyl tape as shown below.
DATA1 to DATA3
Other equipment can be connected to DATA1-DATA3 as shown below.
DATA1 (7P)
GPS receiver
GP-310B/320B
This equipment can receive the following NMEA 0183 format sentence from external
equipment. You will need the optional NMEA cable to connect with external equipment.
• Own ship's position:
• Time:
• Ship's speed:
• Other ship's information:
• Wind speed and angle:
• Heading (True):
• Heading (Magnetic
• Course:
• Depth:
• Waypoint
• Water temperature:
• Target data
• DSC information
Waterproofing cap (yellow)
Connector nut (for 24P)
Waterproofing cap and connector nut, sectional view
DATA2 (6P)
NMEA sentence
(ex. navaid)
GGA>RMC>RMA>GLL
ZDA>RMC
RMC>RMA>VTG>VHW
TTM
MWV>VWT/VWR
HDT>HDG>HDM>VHW
HDM>HDG>HDT>VHW
RMC>RMA>VTG
DPT>DBT>DBS>DBK
RMB>WPL>BWR>BWC
MTW
TLL (output from VHF radiotelephone FM-2721)
DSC>DSE (output from VHF marine transceiver FM-3000)
Vinyl tape
DATA3 (6P)
Heading sensor (ex. SC-60/120)
(MODEL series only)
2-2
Advertisement
Table of Contents
