Microtek ScanMaker IIG User Manual page 82

• To scan mounted slides
(If the thickness of the slide is about the same as the
thickness of the Microtek slide mount)
Place the mounted slide in film mount #3. Secure the film
under the clips of the film mount to lock the slide in.
• To scan mounted slides (If the thickness of the slide is
thinner than the Microtek slide mount)
Place the metal slide spacer beneath the clips of film mount #3,
then push the mounted slide under the clips to lock the slide
in.
Place film mount #3 inside the standard film holder, and rest
3
the upper and left edges of the film adapter against the three
guide pins for positioning.
Be careful that the guide pins do not puncture the film when
you place the film inside the film holder.
2-52 Microtek User's Guide for Windows
Film mount #3
Mounted slide
Film mount #3
Mounted slide
Metal slide spacer