Microtek ScanMaker IIG User Manual page 139

To use the Scan Frame tool:
Click on the Scan Frame tool.
1
Move the pointer (now a crossbar) to the preview image, and
2
draw a frame enclosing the area to be selected. When you
release the mouse, the scan frame will be in a marquee.
To make multiple scan frames (which would add scan jobs),
hold down the Shift key and drag the mouse. For more
information on scan jobs, refer to the Scan Job section of the
Reference.
To resize the scan frame, do either of the following:
3
• Move the cursor to any corner of the frame; the pointer will
change to a double-headed arrow. Hold down the mouse,
and drag to form a new area, then release the mouse; or
• Click on the Scan Frame tool again and restart the area-
selection process.
Reference: The Preview Window 5-31