Microtek ScanMaker IIG User Manual page 228

Appendix D: The Quick Panel Utility...
Setting parameters for the Copy function
Click on the Quick Panel System box, and from the menu that appears,
1
choose Command Wizard.
2 When the Command Wizard dialog box appears, click on the Copy icon. See
below for more details.
A Title: The name of the selected icon. The title of the original icon is
grayed out and cannot be changed; only the titles of icons that have
been duplicated (through the Duplicate button) can be changed.
B Scanning Setting: This is the name of your scan job in the Scan Job
window of the ScanWizard program. If you have several scan jobs
defined in the Scan Job window (Scan Job 1, Scan Job 2, etc.), you
can choose the particular scan job to be called up in the Quick Panel,
send it to the printer.
To select another scanner setting, click on the arrow at the end of the
box and choose from the choices that appear. If there are no other
choices, that means no other scan jobs have been defined in
ScanWizard.
C ScanWizard turnkey icon: Clicking on this icon calls up the
ScanWizard program.
D-6 Microtek User's Guide for Windows
A
B
C
D
E