Microtek ScanMaker IIG User Manual page 48

Scanning Speed:
• ScanMaker III: 3 - 48 milliseconds per line
• ScanMaker IIHR: 3 milliseconds to 78.6
milliseconds per line.
• ScanMaker IISP/IISPX: Raw speed of 44
seconds for 300-dpi, 8.5" x 11" color scan;
14.5 seconds for grayscale and black &
white line art.
• ScanMaker II/IIXE: Raw speed of 70.3
seconds for 300-dpi, 8.5" x 11" color scan;
14.5 seconds for grayscale and black &
white line art.
• ScanMaker IIG: Raw speed of 14.5
seconds for 300-dpi, 8.5" x 11" scan.
grayscale, B&W, or text.
• ScanMaker E3: 3 milliseconds per line for
lineart, halftone, and gray, 7 milliseconds
per line for color (speed measured at 300
dpi)
• ScanMaker E6: 4.5 milliseconds per line
for lineart, halftone, and gray, 20
milliseconds per line for color (speed
measured at 600 dpi)
Scanning times vary greatly, depending on
image dimensions, resolution, memory
capacity, disk access speed, and display
time.
Interface:
Adaptec AVA-1502E SCSI interface card
Voltage:
AC 100V to 120V (North America)
AC 100V to 240V (Europe)
2-18 Microtek User's Guide for Windows
Power Consumption:
• ScanMaker II/IIXE:
AC 100V to 120V: 1A Max.
AC 100V to 240V: 0.6A Max.
47 to 63 Hz
• ScanMakre IIHR:
AC 100V to 120V: 1.2A Max.
AC 100V to 240V: 0.6A Max.
47 to 63 Hz
• ScanMaker IIG, IISP/IISPX, E3, and E6:
AC 100V to 120V: 1A Max.
AC 100V to 240V: 1A Max.
47 to 63 Hz; 38 watts
• ScanMaker III:
AC 100V to 120V: 1.5A Max.
AC 100V to 240V: 1.5A Max.
47 to 63 Hz; 55 watts
Dimensions (L x W X H):
• ScanMaker III: 24" x 14.8" x 5"
• ScanMaker IISP/IISPX, and IIG: 19.1" x
14" x 4.7"
• ScanMaker IIHR, II/IIXE, E3, and E6:
20.2" x 13.5" x 4.6"
Environment:
• Operating temperature:
10° to 40°C (50° to 104°F)
• Storage temperature:
-10° to 60°C (14° to 140°F)
• Relative humidity: 20% to 80%