Microtek ScanMaker IIG User Manual page 229

D Output device: This is where your scan job is output. To select from other
output devices, click on the arrow at the end of the box. If you are unable
to choose a suitable printer, click on the Close button, then go to the
Windows control panel and add a printer.
E Options: These pertain to your printing options and how your image will
appear when it's printed.
• Scale to fit: If this box is checked, the image is resized when printed; the
image may be enlarged or reduced to scale to fit the maximum size
allowed by the paper. If unchecked, the image is printed at its normal
size; the image will be cropped to fit the paper if the image is larger than
the paper that it's being printed on.
• Center horizontally: This option centers the image along the horizontal
axis of the paper.
• Center vertically: This option centers the image along the vertical axis of
the paper.
• Copies: This option lets you specify the number of copies to be printed.
Click on the nudge buttons on either end of the box to increase or
decrease the number.
After all elements are specified, click on the Update button to update the
information in the Quick Panel.
Appendix D: The Quick Panel Utility D-7