Rgb/Dvi Setting (For Non-Solas) - Furuno MU-231 Operator's Manual

Monitor unit
Hide thumbs Also See for MU-231:
Table of Contents

Advertisement

2. ADJUSTMENTS
How to open the [INSTALLATION SETTING] menu
Turn off the monitor unit. While you hold the DISP key, press the
itor unit. Press and hold the DISP key for more than five seconds.
Note: When the "DVI PWR SYNC" slide switch is ON, turn on the connected external equipment
while you press the DISP key to turn on the monitor unit.
2.2

RGB/DVI Setting (For Non-SOLAS)

You can adjust the screen from the RGB, DVI-D1 and DVI-D2 ports individually. Turn on each ex-
ternal equipment and adjust the monitor unit as follows.
1. Select the signal to adjust at the DISP selection window. See section 3.4.
1) Press the DISP key.
2) Press the  or  key to select [RGB], [DVI1] or [DVI2].
2. Press the MENU key to show the menu. The main menu closes automatically when there is
no operation for one minute.
3. Press the  or  key to select [RGB], [DVI1] or [DVI2]. The current setting (the cursor) is
shown in orange. The menu items available depend on the selected menu. The [DVI1] and
[DVI2] setting menus contain the same items.
Note: The menus in gray are not available because of no signal.
RGB
DVI1
DVI2
VIDEO
H_SIZE
1280
V_SIZE
1024
PHASE
16
BRIGHTNESS
128
CONTRAST
32
H_POSITION
50
V_POSITION
20
R_LEVEL
128
G_LEVEL
128
B_LEVEL
128
TEMPERATURE
7000K
B STRETCH
OFF
W STRETCH
OFF
DISP MODE
FULL
SHARPNESS
5
RGB setting menu
4. Press the  or  key to select the menu item to adjust.
5. Press the  or  key to adjust the setting.
6. Press the MENU key to close the menu.
OSD
SYSTEM
(1~32)
(1~256)
(1~64)
(1~99)
(1~40)
(1~256)
(1~256)
(1~256)
(5000K~9300K)
(OFF, 1~10)
(OFF, 1~10)
(FULL/NORMAL)
(1~10)
/BRILL key to turn on the mon-
RGB
DVI1
Menu
BRIGHTNESS
CONTRAST
H_POSITION
V_POSITION
R_LEVEL
G_LEVEL
Menu
B_LEVEL
item
TEMPERATURE
B STRETCH
W STRETCH
DISP MODE
SHARPNESS
14
DVI2
VIDEO
OSD
SYSTEM
128
(1~256)
32
(1~64)
25
(1~50)
20
(1~40)
128
(1~256)
128
(1~256)
128
(1~256)
7000K
(5000K~9300K)
OFF
(OFF, 1~10)
OFF
(OFF, 1~10)
FULL
(FULL/NORMAL)
1
(1~10)
DVI setting menu

Advertisement

Table of Contents
loading

Table of Contents