Step 1 – Load Plates
• If installed, remove load plates at the end of each bow,
opposite from the passenger side pan mechanism.
• Repeat on both bows.
Step 2 – Install Latch Assembly
• At the end of the rear bow, mount latch assembly in the
squares shown.
• Use the 3
rd
set of square holes from the end of the bow.
• Mount using two 5/16" x 1" carriage bolts, two 5/16" flat
washers and two 5/16" nyloc nuts.
For Technical Support Call: 800-343-7486 Monday-Friday 7AM - 4 PM (PST)
Installation Instructions – 4A96L
Page 6