Install Instructions – 4A815 *PLEASE READ ALL INSTRUCTIONS AND WARNINGS PRIOR TO ASSEMBLING, INSTALLING, AND USING THIS PRODUCT* Warning Always check for wires, fuel tanks and lines, brake lines and other important vehicle functionality items prior to drilling and installing all products.
Install Instructions – 4A815 Step 1 – Determine Location • Determine location of ladder rack ext bracket to be installed. • Be sure this location corresponds to the shorter ladder being installed. Step 2 – Drill locations • Once the desired location are found, Drill through the EXT bracket and into the tube using a No.
Install Instructions – 4A815 Step 3 – Install EXT bracket • Place EXT bracket where previous holes were drilled. • Bolt EXT bracket to the cross support using a 5/16” x 3/4" carriage bolt, a 5/16” flat washer and a 5/16” nyloc nut.
Install Instructions – 4A815 Step 4 – Re-Locate Ladder Stop • Move ladder stop to the EXT bracket. • Remove from the original location and re-bolt to the EXT bracket as shown. For Technical Support Call: 800-343-7486 Monday-Friday 7AM - 4 PM (PST)
Page 7
Install Instructions – 4A815 ENSURE ALL BOLTS ARE TIGHT YOUR INSTALLATION IS NOW COMPLETE For Technical Support Call: 800-343-7486 Monday-Friday 7AM - 4 PM (PST) Page 6...