Step 16 Assemble Ladder Hook; Step 17 Install Ladder Hook - Kargo Master 4A96L Installation Manual

Step 16 – Assemble Ladder Hooks
• Bolt ladder hook ASM to ladder hook weldment as shown.
• Use 1/4" x 3/4" hex head and 1/4" flat washer. This can be adjusted later.
Step 17 – Install Ladder Hooks
• Using the hardware and installed studs on the bows, loosen the nuts and slide ladder hook
into place. Be sure the washers are on the outside of the ladder hook.
• TIGHTEN
For Technical Support Call: 800-343-7486 Monday-Friday 7AM - 4 PM (PST)
Installation Instructions – 4A96L
Page 18