Instructions – 4A81L *PLEASE READ ALL INSTRUCTIONS AND WARNINGS PRIOR TO ASSEMBLING, INSTALLING, AND USING THIS PRODUCT* Warning Always check for wires, fuel tanks and lines, brake lines and other important vehicle functionality items prior to drilling and installing all products.
Instructions – 4A81L Step 1 – Remove Ladder Stops • If havent already done so, remove ladder stops from opposite end of both bows where the clamp and lock is installed. For Technical Support Call: 800-343-7486 Monday-Friday 7AM - 4 PM (PST)
Instructions – 4A81L Step 2 – Mount Side Tube • Place a generous amount of sealant into the tube connection. • Place side tube on top of installed bows. • Have the bend towards the front of the vehicle as shown.
Instructions – 4A81L Step 3 – Mount Clamp Tube • Place clamp and lock L bracket on top of installed bows. Do not install hardware right now. • Insert plastic bushings into the clamp and lock L bracket and the rotation bar plate installed in Step 2, with flanges as shown so they cannot come out at a later time.
Page 9
Instructions – 4A81L • Insert clamp tube into both plastic bushings. • Adjust clamp on clamp tube to fit firmly against your ladder. • Bolt clamp and lock L bracket to bows using 3/8” x 1” carriage bolt, 3/8” flat washer and a 3/8”...
Instructions – 4A81L Step 4 – Mount Handle • Bolt handle to clamp tube using a 5/16” x 2-3/4” hex head, two 5/16” flat washers, 5/16” nylon washer and 5/16” a nyloc. The nylon washer goes in between the clamp tube and handle.
Instructions – 4A81L Step 6 – Mount Ladder Hook • Bolt ladder hook bracket to the bow in the orientation shown using a 3/8” x 1” carriage bolt, a 3/8” flat washer and a 3/8” nyloc. Be sure the bracket is square to the bow.
Page 12
Instructions – 4A81L GO BACK AND ENSURE ALL HARDWARE IS TIGHT Your installation is now complete. BE SURE LADDER IS SECURE PRIOR TO TRANSPORTATON For Technical Support Call: 800-343-7486 Monday-Friday 7AM - 4 PM (PST) Page 11...