Step 7 Install Rear Pan - Kargo Master 4A96L Installation Manual

Step 7 – Install Rear Pan
• Remove hardware from the installed damper
mechanism from step 4.
• Place rear pan on top of wheels and bow. Be sure the wheel caps DID NOT come off.
• Align the arms from the pan with the holes in the damper mechanism where the bolts were
previously removed.
• Bolt together using hardware that was removed, only mount the front two bolts, leaving
the holes to the rear as shown empty. The empty holes is for the handle installation.
• Snug Tighten, but allow movement.
For Technical Support Call: 800-343-7486 Monday-Friday 7AM - 4 PM (PST)
Installation Instructions – 4A96L
Page 11