Fax Type; Ncu; Tam - Canon JX500 Service Manual

5-12-3 #3 FAX TYPE

Each model equips different specifications and functions from one another. Such differences are
by not only the MFP service function region setting
type settings. Adjusting the FAX type with SSSW changes each parameter according to the
default. MFP service function region setting does not change when adjusting the FAX type.

5-12-4 #4 NCU

Do not use this switch.

5-12-5 #5 TAM

Adjust the TAM setting with the Bit switch and the numeric parameter.
1) Bit SW
SW01
BIT
*0 Not used.
*1 Not used.
*2 Not used.
3 DT Detection during TAM
4 ROT detection while playing ICM
5 No sound detection
*6 Not used.
7 No sound time recording
[Bit 0] to [Bit2] and [Bit 6]: Do not use the bits.
SW02
BIT
*0 Not used.
*1 Not used.
2 Signal frequency change
*3 Not used.
4 Intermittent signal detection
*5 Not used.
6 Signal type
7 Signal detection
[Bit 0], [Bit 1], [Bit 3] and [Bit 5]: Do not use the bits.
FUNCTION
FUNCTION
Part 1 - 66
(Part1: 5-8-6 region setting) but also FAX
1
Available
Available
Available
Available
1
Available
From ON
Continuous tone
Available
0
Not available
Not available
Not available
Not available
0
Not available
From both ON/OFF
Intermittent tone
Not available