5-4 User Maintenance Mode
5-4-1 How to Enter in User Maintenance Mode
1.
Set to the hard-powr-on.
2.
Press [ON/OFF] key. Start the normal mode.
↓
10:10
Tel/Fax
3.
Press [
↓
CS CLEANING
5-4-2 Selective Function in User Maintenance Mode
1.
10:10
Tel/Fax
2. Press [ ] [ ] keys to select a function.
3. Press [
Start] key to execute the function.
4. Press [ ] [ ] [ ] [ ] [Numeric] keys at each setting mode to change the value.
5. Press [
Start] key to valid the changed setting.
Press [Menu] key when returning to the user maintenance mode.
Press [ Stop] key when returning to standby.
Standby
] key.
User maintenance mode
User maintenance mode
Part 1 - 41