Canon JX500 Service Manual page 102

6-5-2 Assembly of Chassis Unit and Presser Holder
Assemble in the reverse order of disassembly.
Install the PE sensor lever spring to the PE sensor lever. Align the PE sensor lever
connection slit with the pressure holder protrusion. Install the PE sensor and the
pressure holder together. Rotate the PE sensor lever. Install the pressure holder to
the chassis unit.
6-5-3 Chassis Unit & Presser Holder Cable Wiring
Fig.Part 1-51 Chassis Unit cable wiring
1: The Carriage Unit cable
2: The Carriage Motor cables
Fig.Part 1-52 Chassis Unit cable wiring
Part 1 - 94
1:Tape attachment position of
the Carriage Unit cable