6-5 Assembly/Disassembly of Chassis Unit and Presser
Holder
6-5-1 Disassembly of Chassis Unit and Presser Holder
1. Remove the DS spring.
2. Remove the PE sensor board ass'y (1) fixed by S2 screws. Remove the DS Sensor(2) and
the PGC Sensor Board ass'y (3). Unplug the PGC sensor board ass'y connector cable.
3. Remove five pressure holder springs. Remove the pickup roller bushing S1 screw. Remove
the pickup roller bushing.
Fig.Part 1-46 Disassembly of the DS spring.
Fig.Part 1-47 Disassembly of Sensor Board
Fig.Part 1-48 Disassembly of Pickup Roller Bushing
Part 1 - 92
(Binding Head M3 × 6) × 1
(TP M3 × 8) × 1