Table of Contents
Advertisement
4.2. Configure the TP6310 Board
The following steps describe the administrative procedures for configuring the active
TP6310 board in the Avaya G860 Media Gateway chassis. These procedures will
administer settings for SIP and DS3 trunking, as well as the call routing rules associated
with this TP6310 board to enable signalling/media connectivity between the Avaya
Meeting Exchange Enterprise S6800 Conferencing Server and the PSTN.
•
Board IP Address and
•
Board Voice configuration
Step
Description
4.2.1
Prior to making any change to the configuration of the TP6310 board, the
board must be locked.
Note: If there is a single TP6310 board in the Avaya G860 Media Gateway,
locking this board removes it from service and is service impacting.
RJ; Reviewed:
SPOC 3/23/2009
•
On the MGs List pane , double-click on the row corresponding to
the Avaya G860 Media Gateway .
Note: The MG Status tab will be highlighted and the Status
pane will open, depicting a replica of the front panel of the
Avaya G860 Media Gateway chassis. Board slots are numbered
from 1 to 10 from bottom to top on the left side. For these
Application Notes, installed gateway boards include the TP6310
DS3 boards in slots 8, 9 and 10.
•
Click on the active TP6310 board shown in black, and use mouse
button to select Maintenance Lock.
•
[Not Shown] To confirm Lock, click Yes in the confirmation window
that is displayed.
Solution & Interoperability Test Lab Application Notes
©2009 Avaya Inc. All Rights Reserved.
36 of 71
MXS6800SES-G860
Advertisement
Table of Contents
