Cbutil Utility - Avaya G860 Configuring Manual

3.4. CBUTIL Utility

The following steps provide examples of how to provision Scan Flow(Scheduled and
Demand) conference call functions by utilizing the cbutil utility on the Avaya Meeting
Exchange Enterprise S6800 Application Server.
.
Step Description
3.4.1 To map DNIS entries, run the cbutil utility on MX as follows:
•
If not already logged on, log in to the Avaya Meeting Exchange
Enterprise S6800 Application Server with an ssh connection using
PuTTY with the appropriate credentials.
•
Enable Dial-In access (via passcode) to conferences provisioned on the
Avaya Meeting Exchange Enterprise S6800 Application Server as
follows:
•
Add a DNIS entry for a scan call function corresponding to DID 70001
by entering the following command at the command prompt:
•
cbutil add <dnis> <rg> <msg> <ps> <ucps> <func> [-l <ln> -c
<cn>], where the variables for add command is defined as
follows:
In this sample configuration:
[sroot@MX-G860]# cbutil add 70001 0 1 1 n scan
cbutil
Copyright 2004 Avaya, Inc. All rights reserved.
3.4.2 At the command prompt, enter cbutil list to verify the DNIS entries provisioned
[sroot@MX-G860 config]# cbutil list
cbutil
Copyright 2004 Avaya, Inc. All rights reserved.
DNIS
Company Name
---------------- --- --- --- -- -------- ---------- -------------
------- ------------------- ----------- ----------
10001
OneX
70001
0
80001
G860
RJ; Reviewed:
SPOC 3/23/2009
o <dnis> DNIS
o <rg> Reservation Group
o <msg> Annunciator message number
o <ps> Prompt Set number (0-20)
o <ucps> Use Conference Prompt Set (y/n)
o <func> One of:
DIRECT/SCAN/ENTER/HANGUP/AUTOVL/FLEX
o -l <"ln"> Optional line name to associate with
caller
o -c <"cn"> Optional company name to associate with
caller
Grp Msg PS
Room Start
0 247 1
0 247 1
0
0 247 1
Solution & Interoperability Test Lab Application Notes
©2009 Avaya Inc. All Rights Reserved.
CP Function On Failure Line Name
Room End
N SCAN ENTER
0
N SCAN ENTER
N SCAN ENTER
0
LocalMX-
0
MX-G860
MX-SES-
0
25 of 71
MXS6800SES-G860