Table of Contents
Advertisement
4. Configure the Avaya G860 Media Gateway
The following sections describe the steps for configuring the SIP and PSTN trunks and
call routing for the Avaya G860 Media Gateway. This configuration will enable the
Avaya G860 Media Gateway to interoperate with the Avaya Meeting Exchange
Enterprise S6800 Conferencing Server both directly and via Avaya SIP Enablement
Services (see Figure 1).
Configuration is performed using the EMS client GUI-based provisioning system, which
is supported by the Microsoft Operating System. It is assumed that the Avaya G860
Media Gateway, EMS server, and EMS client have already been installed.
•
Logging into Gateway using EMS Client
Step Description
Invoke the GUI provisioning system from a PC running the EMS client by
4.1
double-clicking on the desktop icon as shown below.
From the login screen that is displayed, enter the login, password and the IP
address of the EMS server.
RJ; Reviewed:
SPOC 3/23/2009
Solution & Interoperability Test Lab Application Notes
©2009 Avaya Inc. All Rights Reserved.
33 of 71
MXS6800SES-G860
Advertisement
Table of Contents
