Cable Requirements For The Vsp 8000 Series - Avaya 8000 Series Installing Manual

4. Insert and tighten the rack-mount screws.
5. Verify that the switch is securely fastened to the rack.
6. Connect power and network connections to the switch.

Cable requirements for the VSP 8000 Series

The following table describes the cables required for an Avaya Virtual Services Platform 8000
Series.
Table 8: Switch cable requirements
Required Cable
10/100/1000BASE-TX Ports
Console Port (10101)
November 2016
Description
The interconnect cabling must conform to the Cat5e, Cat6, or Cat6e
specification of the Commercial Building Telecommunications Cabling
Standard, ANSI/TIA/EIA 568-B fitted with an RJ-45 Module jack.
Varies depending on the user device. The Avaya Virtual Services
Platform 8000 Series has an RJ-45 female connector so a serial
Installing the Avaya VSP 8000 Series
Comments on this document? infodev@avaya.com
Cable requirements for the VSP 8000 Series
Table continues...
69