Technical Specifications - Avaya 8000 Series Installing Manual

Installing the Avaya Virtual Services Platform 8000 Series
Figure 11: Job aid
To install the ESD discharge cable, perform this procedure.
1. Connect the ground lug on the ESD discharge cable to a safe and suitable earth ground.
2. Connect all RJ-45 cable connectors to the female RJ-45 connector of the ESD discharge
cable for at least 5 seconds, and then connect each RJ-45 cable connector to the switch.
3. Leave cables connected to the networking equipment. After you connect cables to
networking equipment, the cables do not build up charge.

Technical specifications

The following table provides the technical specifications for the individual switches in this series.
Ensure that the area where you install the switch and where it operates meets these requirements.
Warning:
To avoid bodily injury from hazardous electrical shock and current, never remove the top of the
device. No user-serviceable components are inside.
Table 5: Physical specifications
Specifications
Height
Width
Depth
November 2016
8200
3.5 in. (88.9mm) — 2U
17.5 in. (444.5 mm) - 19" rack
mountable
19.68 in. (500 mm)
Installing the Avaya VSP 8000 Series
Comments on this document? infodev@avaya.com
8400
3.5 in. (88.9mm) — 2U
17.5 in. (444.5 mm) — 19" rack
mount compatible
26.5 in. (673 mm)
Table continues...
32