Siemens SINUMERIK 828D PPU Series Manual page 155

①
②
③
④
⑤
⑥
⑦
⑧
⑨
⑩
Figure 7-31
Control elements of the mini handheld unit
Features of the operator controls:
● EMERGENCY STOP button
● Axis selection switch
PPU
Manual, 01/2014, 6FC5397-2DP40-3BA3
EMERGENCY STOP button
Selection switch for five axes and neutral position
Enabling button, two channels, three positions
Handwheel
Rapid traverse key for high-speed travel with traversing keys or handwheel
Traversing key direction + / direction -
Function keys F1, F2, F3
Holder (optional)
Connecting cable
Slide-in labels
Control elements of the mini handheld unit
The EMERGENCY STOP button must be pressed in the following emergency situations:
– When a person is at risk.
– When there is a danger of the machine or workpiece being damaged.
The axis selection switch can be used to select up to five axes. The coding is carried out
in Gray Code.
Connectable components
7.5 Mini handheld unit
155