Siemens SINUMERIK 828D PPU Series Manual page 109

Name
Rotary switch for
feed
Set of tensioners
Table 7-15
Component
Keyset
Yellow backing plate
Table 7-16
Component
Square key cap, can be
laser-labeled
Square key cap, for
inscription plates
Cable set
Removing the rotary switch
Note
For the machine control panel, use only electronic rotary switches.
Procedure:
1. Lever the cover
2. Remove the nut of collet
3. Remove the entire rotary knob
4. Remove the lock nut
PPU
Manual, 01/2014, 6FC5397-2DP40-3BA3
Description
Override feedrate / rapid traverse electronic
rotary switch 1x23G, T=32, cap, knob, pointer,
feedrate and rapid-traverse dials
Set of tensioners for supplementary operator
components with 2.5 mm profile, 20mm length
Accessories pack (for delivery ex works)
Description
Key caps for turning (labeled)
Ergo gray key caps (can be labeled)
Clear key caps (can be labeled)
for emergency stop
Accessories available for order
Description
1 set of 90, ergo-gray and 20 each
of red / green / yellow / medium gray
1 set of 90, clear
For additional MCP control
devices, length 500 mm
③
off the rotary knob
①
with a wrench (width 10).
②
⑤
on the axis of the rotary switch
Amount
②
(snap-on connection).
.
④
Connectable components
7.1 MCP 483C PN
Qua Article number
ntity
1 6FC5247–0AF13–1AA0
9 6FC5248–0AF14–0AA0
Amount
Article number
1 6FC5248–0AF12–0AA0
1 6FC5248–0AF21–0AA0
60 6FC5247-0AA35-0AA0
with a wrench (width 14).
9
30
30
1
109