Install Switch Integration Software - Avaya INTUITY AUDIX LX Installation Printable Manual

Installation Printable Guide for the INTUITY AUDIX LX

Install Switch Integration Software

Install one of the two switch integration packages. The system default is that no switch integration
package is installed. The two choices are:
OverLAN Switch Integration
l
Inband Switch Integration
l
You can only have one switch integration software package installed on the system at one time. If
one package is already installed and you want another, you must remove the first package before
installing the second package.
1. Log on as craft (for a new installation) or sa (if restoring a system). The sa default password
is sapasswd.
2. From the web-based Administration Main Menu, select:
Utilities
Software Management
Software Installation
3. Switch Integration software is included on the main INTUITY AUDIX LX software CD. Obtain
the CD, then follow the on-screen instructions to insert the CD.
4. Click CD (or another installation media if applicable).
5. The system warns you that system data should be backed up. If necessary, perform a system
backup. If the system is new, no data needs to be backed up.
The system displays a list of packages available on the CD, including the two switch
integration packages: OverLAN and Serial-Inband.
6. Select the switch integration package you want to install. If you know which type of switch
integration you plan to do, based on configuration notes, select the corresponding software
package. You can only have one switch integration software package installed on the system
at one time.
7. Press PageDown to see the bottom of the page, and click Install selected packages.
The system displays a list of packages to be installed.
8. Review the list, then click Proceed with installation .
The system begins the installation and displays installation status messages. The installation
is complete when the pointer changes from a wristwatch to an X.
9. After the software is installed, press PageDown to see the bottom of the status page.
10. If the software was installed successfully, remove the CD from the CD drive.
11. Click Restart the System.
After the system restarts, it displays the message:
Press Enter to return to prompt...
file://C:\Avaya_INTUITY_AUDIX_LX\installprint.htm
Page 19 of 42
3/20/2002