Table of Contents
Advertisement
Using the menu function (continued)
3.
To close the MENU, press the MENU button again or select EXIT and press
the ◄ cursor button or ENTER button. If you do not do anything, the dialog
automatically disappears after about 30 seconds.
NOTE
• Some functions cannot be performed when a certain input port is
selected, or when a certain input signal is displayed.
• To reset the operation, press RESET button on the remote control during the
operation. Note that some items (such as LANGUAGE, VOLUME) cannot be
reset.
• In the ADVANCED MENU, when you want to return to the previous display,
press the ◄ cursor button on the remote control.
Indication in OSD (On Screen Display)
The meanings of the general words on the OSD are as follows.
Indication
EXIT
RETURN
CANCEL or NO
OK or YES
Closes the OSD menu. It is the same as pressing the MENU
button.
Returns the menu to the previous menu.
Cancels the operation in the present menu and returns to the
previous menu.
Executes the prepared function or shifts the menu to the next
menu.
Meaning
55
Operating
QM00481-1
Advertisement
Table of Contents
