Table of Contents
Advertisement
Operating
3.3 Adjusting Cropping Area
Adjust the Cropping Area when cutting out a part of input image.
Select SETUP with ▲/▼ buttons and press ►, ENTER or INPUT button.
* MODE is set to [OFF] temporarily and the guide of the Cropping Area
is displayed.
Select [LT]/[WH] with ▲/▼ buttons and press the ENTER or INPUT button.
Move the guide display with ▲/▼/◄/► buttons to select the region of the
screen to be cut out.
Press the ENTER or INPUT button and then press ◄ button to select SETUP,
and MODE switches to ON automatically.
Input Image
Cropping
3.4 Adjust Cropping Area of the other projector.
Set the Cropping Area of the other projector with the same value as one
projector.
The input image is automatically cut out according to the settings of the
Blending Region.
* To keep input image from not being seen while setting up, set BLANK to ON.
Input Image
Cropping
(continued on next page)
46
QM00481-1
Advertisement
Table of Contents
