Dukane 8980WUSS User Manual page 53

PbyP (Picture by Picture) / PinP (Picture in Picture) (continued)
PbyP / PinP SWAP function
Press the MY BUTTON assigned the PbyP / PinP SWAP (
the area is exchanged without any setting change.
main sub
area area
NOTE
• For some signals, it may not be displayed correctly in the PbyP / PinP
mode, even if it can be displayed properly in the normal mode.
• PbyP/PinP is unavailable when other than OFF is selected in GEOMETRY
CORRECTION > EDGE BLENDING > MODE.
Changing the size of main area in PbyP mode
Using ▲/▼ buttons on the remote control changes the size of main area in
PbyP mode.
main area
sub area
Changing the position of sub area in PinP mode
1. Select PinP POSITION in INPUT MENU (
2. Using ▲/▼ buttons on the remote control changes the position of sub area
in PinP mode.
main area
sub area
sub main
area area
PbyP mode
main area sub area
main area
sub area
main area
sub area
main area
71).
main area
sub area
53
Operating
90). The position of
sub area
main area
PinP mode
sub area
main area
sub area
QM00481-1