Table of Contents
Advertisement
Troubleshooting
Issues that may be easy to be mistaken for machine defects (continued)
Issue
Network does
not work.
Displayed
image is
partially dark.
The IR and
RS-232C does
not work on
HDBaseT
connection.
HDBaseT
connection
does not work.
IR and LAN
does not work
via HDBaseT.
(continued on next page)
Cases not involving a machine defect
The SAVING/NETWORK(WOL) function is working.
Select NORMAL or QUICK START for STANDBY MODE
item in the SETUP menu.
The same network address is set for both wireless
and wired LAN.
Change the network address setting for wireless or wired
LAN.
Blending Region is set.
Set all Blending Region to OFF or set Blending – Mode
to OFF.
The SAVING/NETWORK(WOL) function is working.
Select NORMAL or QUICK START for STANDBY MODE
item in the SETUP menu.
The SAVING/NETWORK(WOL) function is working.
Select NORMAL or QUICK START for STANDBY MODE
item in the SETUP menu.
The connected equipment may not be supported by
HDBaseT.
Refer to User's manual (detailed) for connection.
Check if the IR setting is OFF under HDBaseT.
EASY MENU > ADVANCED MENU > OPTION >
SERVICE > REMOTE RECEIV.
Check if the LAN setting is HDBaseT.
EASY MENU > ADVANCED MENU >
OPTION>SERVICE>CONTROL TERMINAL > WIRED
NETWORK
131
Reference
page
76
–
44
76
76
14
99
–
QM00481-1
Advertisement
Table of Contents
