Table of Contents
Advertisement
Item
SERVICE
(continued)
(continued on next page)
Switches REMOTE CONTROL OUT port.
1) Use the ▲ / ▼ buttons to select switching
mode.
REMOTE CONTROL: Switches ON/OFF of the
signal of an infrared remote control or a wired
remote control.
REMOTE
HDBaseT: Switches ON/OFF of the remote control
CONTROL
signal from HDBaseT.
OUT
2) Use the ◄/► buttons to switch ON/OFF.
ON
The projector or the projector connected to
REMOTE CONTROL OUT may not operate
correctly if they are operated from multiple remote
controls at the same time.
Selects the device to refer to the resolution
information of HDMI output.
• When EXTERNAL DEVICE is selected, the
resolution of the signal input to the projector and
HDMI OUT
signal output from the projector may be restricted
RESOLUTION
by the maximum resolution of the connected
device such as projector or monitor.
• When PROJECTOR is selected, the image from
the device connected to HDMI OUT may not be
displayed normally.
Description
OFF
EXTERNAL DEVICE
103
OPTION menu
PROJECTOR
QM00481-1
Advertisement
Table of Contents
