Table of Contents
Advertisement
Issues that may be easy to be mistaken for machine defects (continued)
Issue
Schedule
function does
not work.
STANDBY
OUTPUT
(AUDIO OUT,
HDMI OUT,
MONITOR
OUT) does
not work with
standby mode.
The signal from
HDMI OUT is
not output in the
external device.
The signal from
HDMI OUT is
not output in
other connected
projectors.
(continued on next page)
Cases not involving a machine defect
The SAVING/NETWORK(WOL) function is working.
Select NORMAL or QUICK START for STANDBY MODE
item in the SETUP menu.
The internal clock has been reset.
NETWORK(WOL) mode or the AC power, the current
date and time setting is reset.
Check the DATE AND TIME setting in OPTION-
SCHEDULE.
Check if SAVING/NETWORK(WOL) is set in SETUP -
STANDBY MODE.
Set NORMAL or QUICK START in the menu above.
If the signal is not output yet, check if a desirable item is
set in SETUP - STANDBY OUTPUT.
Check if PROJECTOR is set in OPTION - SERVICE -
HDMI OUT RESOLUTION.
Set EXTERNAL DEVICE in the menu above.
If the signal is not output yet, check the supported
resolution of the external device.
Check if EXTERNAL DEVICE is set in OPTION -
SERVICE - HDMI OUT RESOLUTION.
Set PROJECTOR in the menu above.
VING/
134
Troubleshooting
Reference
page
76
–
76, 79
103
103
QM00481-1
Advertisement
Table of Contents
