Dukane 8980WUSS User Manual page 100

OPTION menu
Item
SERVICE
(continued)
(continued on next page)
Selecting this item displays COMMUNICATION
menu.
In this menu, you can configure the serial
communication settings of the projector using the
CONTROL port.
• Select an item using the cursor buttons ▲/▼.
Then pressing the ► button opens the submenu
for the setting item you selected. Or, pressing
the ◄ button instead of the ► button makes the
menu back to the previous one without changing
the setup. Each submenu can be operated as
described above.
• For the function of serial communication, refer to
COMMUNICATION
the Network Guide.
COMMUNICATION TYPE
Select the communication type for transmission
using the CONTROL port.
NETWORK BRIDGE: Select this type, if it is
OFF: Select this mode to receive RS-232C
• OFF is the default setting.
• When you select the NETWORK BRIDGE, check
the item, TRANSMISSION METHOD (
Description
required to control an external device as a
network terminal, using this projector from the
computer.
The CONTROL port does not accept RS-232C
commands ( 7. Network Bridge Function in
the Network Guide).
commands using the CONTROL port.
100
101).
QM00481-1