Table of Contents
Advertisement
Item
SERVICE
(continued)
(continued on next page)
SERIAL SETTINGS
Select the serial communication condition for the
CONTROL port.
BAUD RATE
TRANSMISSION METHOD
Select the transmission method for communication by
COMMUNICATION
the NETWORK BRIDGE from the CONTROL port.
(continued)
HALF-DUPLEX: This method lets the projector
FULL-DUPLEX: This method lets the projector
• HALF-DUPLEX is selected as the default setting.
• If you select HALF-DUPLEX, check the setting of
the item RESPONSE LIMIT TIME (
Description
4800bps
9600bps
PARITY
NONE
ODD
HALF-DUPLEX
make two way communication, but only one
direction, either transmitting or receiving data, is
allowed at a time.
make two way communication, transmitting and
receiving data at the same time.
101
OPTION menu
19200bps
EVEN
FULL-DUPLEX
102).
38400bps
QM00481-1
Advertisement
Table of Contents
