Table of Contents
Advertisement
Connecting with your devices (continued)
8980WUSS/8980WUSSB
NOTE
• The 3G-SDI port of this model supports the following SDI signals:
SD-SDI signal: conforming to SMPTE ST 259-C standard
YCBCR 4:2:2 10-bit
480i, 576i
Single link HD-SDI signal: conforming to SMPTE ST 292 standard
3G-SDI Level-A signal: conforming to SMPTE ST 424 standard
- This projector can be connected with other equipment that has SDI connector,
but with some equipment the projector may not work properly.
- Use a cable of 5CFB or greater (5CFB, 7CFB, and so on), or Belden 1694A or
greater to transmit the image properly. Use a cable with a length of 100m or
less.
- Setting by MENU is necessary depending on a connected device.
YPBPR 4:2:2 10-bit
720p@50/60, 1080i@50/60, 1080sf@25/30
YPBPR 4:2:2 10-bit
1080p@50/60
23
Camera for
commercial use
Setting up
QM00481-1
Advertisement
Table of Contents
