Lens Memory - Dukane 8980WUSS User Manual

Operating
Adjusting the lens (continued)

Lens memory

This projector is equipped with memory functions for the
lens adjustments (LENS SHIFT and LENS TYPE). Up
to three sets of adjustments can be stored.
To use the lens memory feature, press the LOAD
or SAVE button, or select LENS MEMORY in LENS
SHIFT menu and press the ► or ENTER button. Then
the LENS MEMORY dialog appears. The current lens
adjustments are displayed on the "CURRENT" line.
The adjustments already stored in the lens memory are
displayed on the lines of SAVE and LOAD-1 to 3.
SAVE:
To store the current lens adjustments, select one of the
"SAVE" options numbered 1 to 3 (number of the lens
memory) and press the ►or ENTER button.
Remember that the current data being stored
of a memory is lost by saving new data into the
memory.
LOAD:
To recall stored adjustments, select one of the
"LOAD" options numbered 1 to 3 (number of the
lens memory) and press the ►or ENTER button.
Remember that the current adjusted condition is lost by loading data. If you want to
keep the current adjustment, save it before performing a LOAD function.
CLEAR LENS MEMORY:
To clear the adjustment stored in a lens memory, select CLEAR LENS MEMORY
and press the ►or ENTER button. A message dialog is displayed for confirmation.
Press the ►button again to clear the lens memory.
NOTE
• The projector may ignore the operation by buttons while moving the lens.
• You can perform the SAVE or LOAD function using LENS MEMORY button.
NETWORK INTERACTIVE
INFO
40
LENS MEMORY
button
LENS SHIFT button
QM00481-1