Shure ANI22 Manual page 5

ANI22 Audio Network Interface
Note: Logic connections are only featured on the block connector version.
Block Connector Pin Assignments:
XLR Pin Assignments:
③ Chassis Ground Screw
Provides an optional connection for microphone shield wire to chassis ground.
④ LED Indicators
Power: Power over Ethernet (PoE) present
Note: Use a PoE injector if your network switch does not supply PoE.
Network: Network connection active
Network Audio: Dante™ audio present on the network
Note: Error details are available in the event log in the web application.
LED Status
Off
Green
Red
Encryption:
LED Status
Off
Green
Red
⑤ Dante Network Port
Connects to a network switch to send Dante™ audio, while receiving Power over Ethernet (PoE) and data from the control software. See the Dante and net-
working section for additional information.
2017/10/10
switch
led
gnd
1
2
3
Logic Mute (sent from microphone)
Logic LED (received by microphone)
Activity
No active signal
Device is operating successfully
Error has occurred. See event log for details.
Activity
Audio not encrypted
Successful encrypted audio connection with another device
Encryption error. Possible causes:
Encryption is enabled on one device and not on another •
Passphrase mismatch •
Shure Incorporated
Audio +
Audio -
Audio ground
Logic ground
Audio +
Audio -
Audio ground
Ground
Positive
Negative
5/24