Shure ANI22 Manual page 21

ANI22 Audio Network Interface
< REP LAST_ERROR_EVENT {yyyyyyyyyyyyyyy} >
2017/10/10
Command String:
< GET LIMITER_ENGAGED >
ANI22 Response:
< REP LIMITER_ENGAGED ON >
< REP LIMITER_ENGAGED OFF >
Command String:
< GET xx ENCRYPTION_CH >
ANI22 Response:
< REP xx ENCRYPTION_CH ON >
< REP xx ENCRYPTION_CH OFF >
Command String:
< GET xx PHANTOM_PWR_ENABLE >
ANI22 Response:
< REP xx PHANTOM_PWR_ENABLE ON >
< REP xx PHANTOM_PWR_ENABLE OFF >
Turn Phantom Power On/Off
Command String:
< SET xx PHANTOM_PWR_ENABLE ON >
< SET xx PHANTOM_PWR_ENABLE OFF >
ANI22 Response:
< REP xx PHANTOM_PWR_ENABLE ON >
< REP xx PHANTOM_PWR_ENABLE OFF >
Command String:
< SET REBOOT >
ANI22 Response:
< REP REBOOT >
Command String:
< GET LAST_ERROR_EVENT >
ANI22 Response:
Command String:
< GET xx PEQ yy >
ANI22 Response:
< REP xx PEQ yy ON >
< REP xx PEQ yy OFF >
Command String:
< SET xx PEQ yy ON >
< SET xx PEQ yy OFF >
Get Limiter Status
Get Encryption Status
Get Phantom Power Status
Reboot ANI22
Get Error Events
Get PEQ Filter Enable
Set PEQ Filter Enable
Shure Incorporated
Indicates if the limiter is currently reducing the
signal level.
The ANI22 will respond with one of these strings.
The ANI22 will respond with one of these strings.
The ANI22 will respond with one of these strings.
Send one of these commands to the ANI22.
The ANI22 will respond with one of these strings.
Gets the last error that is loged on the ANI22.
Where yyyyyyyyyyyyyyy is up to 128 characters.
Where xx is the PEQ block 01-04. Where yy is the
PEQ filter 01-04 within the block. 00 can be used
for all blocks or all filters.
Send one of these commands to the ANI22.
21/24