Shure ANI22 Manual page 4

ANI22 Audio Network Interface
sig/clip
XLR Model:
Inputs
INPUT
1
① Signal/Clip Indicators
Each indicator corresponds to a single channel. Analog and digital gain adjustments are made through the web application.
• If an input channel LED turns red, attenuate the level from the source device to prevent clipping at the input stage.
• If an output channel LED turns red, lower the corresponding Digital Gain (dB) fader for the Dante channel under the Input Channels tab. Do not lower the
output level (line/aux/mic), as any clipping indicated on the LED occurs before the final output level stage.
② Audio and Logic Connections
4/24
Inputs
INPUT
1
in1
in2
out1
2
out2
2
LED State
Off
Green
Yellow
Red
Outputs
OUTPUT
1
network audio
2
encryption
Outputs
OUTPUT
1
2
power
network
PoE
reset
PoE
reset
Audio Signal Level
less than -60 dBFS
-60 dBFS to -18 dBFS
-18 dBFS to -6 dBFS
-6 dBFS or more
Shure Incorporated
2017/10/10