Command Strings (Common) - Shure ANI22 Manual

ANI22 Audio Network Interface
Information
An action or event has been successfully completed
Warning
An action cannot be complete, but overall functionality is stable
Error
A problem has occurred that could inhibit functionality.
Log Details
ANI22 Command Strings
This document can also be found at:
The device is connected via Ethernet to a control system, such as AMX, Crestron or Extron.
Connection: Ethernet (TCP/IP; select "Client" in the AMX/Crestron program)
Port: 2202
Conventions
The device has 4 types of strings:
GET
Finds the status of a parameter. After the AMX/Crestron sends a GET command, the ANI22 responds with a REPORT string
SET
Changes the status of a parameter. After the AMX/Crestron sends a SET command, the ANI22 will respond with a REPORT string to indicate the new value of
the parameter.
REP
When the ANI22 receives a GET or SET command, it will reply with a REPORT command to indicate the status of the parameter. REPORT is also sent by the
ANI22 when a parameter is changed on the ANI22 or through the GUI.
SAMPLE
Used for metering audio levels.
All messages sent and received are ASCII. Note that the level indicators and gain indicators are also in ASCII
Most parameters will send a REPORT command when they change. Thus, it is not necessary to constantly query parameters. The ANI22 will send a REPORT
command when any of these parameters change.
The character "x" in all of the following strings represents the channel of the ANI22 and can be ASCII numbers 0 through 4 as in the following table

Command Strings (Common)

< REP MODEL {yyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyy} >
16/24
http://shure.custhelp.com/app/answers/detail/a_id/6368
00
01, 02
03, 04
Command String:
< GET xx ALL >
ANI22 Response:
< REP ... >
Command String:
< GET MODEL >
ANI22 Response:
Command String:
< GET SERIAL_NUM >
Description
Provides details on events and errors, including IP address and subnet mask.
Time Stamp
Power cycles:days:hours:minutes:seconds since most recent boot-up.
Event ID
Indicates event type for internal reference.
Tip: Use the filter to narrow down results. Select a category heading to sort
the log.
Get All
Get Model Number
Get Serial Number
Shure Incorporated
All channels
Analog Inputs
Analog Outputs
Where xx is ASCII channel number: 00 through 04.
Use this command on first power on to update the
status of all parameters.
The ANI22 responds with individual Report strings
for all parameters.
Where yyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyy is 32
characters of the model number. The ANI22 always
responds with a 32 character model number.
2017/10/10