Functions Of Dip Switches - Mitsubishi LE-30CTN Instruction Manual

1. Outline
1.3

Functions of DIP switches

• Open the door of the panel, and you can see a printed circuit board on the main body side. At the upper left
section of this printed circuit board, there are 8-pole DIP switches.
• When the power is turned on, the set conditions of these switches will be read out.
• Each switch has the following function:
• No.1 - - - Sets the tension unit to (N) or ( ×10N ).
• No.2 - - - Sets the taper control method.
• No.3 - - - Sets the taper control method.
• No.4 - - - Sets the function of the AO1 output.
• No.5 - - - Sets the language to be displayed on the liquid
• No.6 - - - (No function is assigned.)
• No.7 - - - Resets data to the initial values for factoring default settings.
• No.8 - - - Sets the operation mode or the adjustment mode.
SW. No.6 is set ON and other SW are set OFF
when the product is delivered from the factory.
SW.No
ON
8
Operation
7
initialization
Japanese
6
5 English
Set tension
4
monitor
3
2
1 ×10N
• Before setting the DIP switches, be sure to externally cut off the power of all the phases. If the powers
to all the phases are not cut off, you may get an electric shock, or the product may be seriously
damaged.
• Set tension monitor - - Outputs the target tension
• Tension monitor- - - - - Outputs
crystal display.
Operation
mode
Data
initialization
initialization
Language
selection
Language
Chinese
selection
AO1 output
Taper control
method
Taper control
method
Unit of tension
Item
No taper control
External reel diameter
signal method
Reel diameter
internal calculation method
No taper control
Setting for taper control method
value in the automatic
control mode.
the material
tension value detected by
the tension detector.
Before changing the set position of a switch,
OFF
be sure to turn the power off.
Tuning
No
Tension
monitor
N
SW.No
2
ON
ON
OFF
OFF
1.3 Functions of DIP switches
DIP switches
SW.No
3
Language
English
ON
Chinese
OFF
Japanese
ON
Setting for language
OFF
5 6
ON OFF
OFF OFF
ON ON
OFF ON
11