Revised History - Mitsubishi LE-30CTN Instruction Manual

Revised History

Data
5/2003
6/2003
7/2003
11/2004
3/2006
10/2008
8/2009
60
Revision
A First Edition
• The tension setting, manual setting and taper ratio setting screens are added.
A1
• The AOC wiring between the servo amplifiers A and B is added. - - - - - p. 44
• Reel inertia mass unit x 10
A2 The panel figure name is changed. (Error is corrected.) - - - - - - - - - - - - - -p. 9
• The zero tension detection function is added.
• AI3 input is erased. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - p. 22
• The position of the resistor for upper limit setting is changed. - - - - - - - p. 43
B
• The reference section is changed (11.3 → 12.3). - - - - - - - - - - - - - - - p. 48
• The power switch symbol is erased. - - - - - - - - - - - - - - - - - - - - - - - - - p. 51
• Other errors including the paragraph format are modified.
Errors are corrected (u →
B1
C The sentence "In conformity to the JIS****" is deleted. - - - - - - - - - - - - - - p. 49
D Conformity to the CE marking
Description
- - - - - - - - - - - - - - - - - - - - - - - - - p. 15 and 20
2 kg → x 10 3
kg (Error is corrected.) - - - - - - p. 45
, t →
). - - - - - - - - - - - - - - - - - - - - - - - - - p. 39