Connecting Cable To Dcs; Connecting Cable To Dbs - Samsung Office DECT 8000 Installation And Programming Manual

Chapter 4
4–12
Installation

Connecting Cable to DCS

Connect the champ connector of the twisted pair cable to the champ connector on the front panel
of the 4BSI or 8BSI card.
4BSI / 8BSI – DCS

Connecting Cable to DBS

This should be done before you install the DBS on its wall-mount bracket.
1. Connect the RJ-45 connector of the twisted pair cable to the LINK port on the rear of the
DBS.
PO W ER
LI N K
LINK port
DBS