Table of Contents
Advertisement
Downloading the Software
8BSI card software is upgraded by downloading the files BSIROM.HEX and DBSROM.HEX from
the console terminal. First, copy these two hex files into a directory on the console terminal. Then,
download the files to the BSI card as follows.
1. The following message appears on the console if the 8BSI card is operating normally.
***********************************
* DECT Console (8-Port BSI Board) *
***********************************
Press the Enter key.
2. Type flo at the <BSI> prompt and press the Enter key. The following menus appear.
========== Select One ==========
[1] BSI
HEX FILE Loading (Addr = 0x00110000)
[2] DBS
HEX FILE Loading (Addr = 0x00150000)
[3] DBS V2 HEX FILE Loading (Addr = 0x00168000)
[R] Restart
When you execute the flo command, all the DBSs connected to the 8BSI card are turned off and DECT
services from the DBSs are stopped.
3. Select menu [1] to download the BSIROM.HEX file from the terminal to the BSI card. The fol-
lowing message appears.
Selected 1) BSI HEX FILE Loading
Please Start Loading!!
4. Click Transfer #
# Send Text File... menu from the HyperTerminal menu.
# #
6–5
Advertisement
Table of Contents
