Connecting To The Public Network - Samsung Officeserv 7100 Technical Manual

OfficeServ 7100
TECHNICAL MANUAL
Figure 11b Private with Public Remote NAT Router connections
NAT ROUTER PUB ADD
205.52.10.80
ITP PVT ADD
109.96.10.119
ITP SERVER ADD
216.43.162.74
109.96.10.130
109.96.10.131

Connecting to the Public Network

When connecting to the public network there are several considerations for IP
addressing and connectivity.
Sufficient bandwidth to support ITP voice and data.
1.
2. Minimum two static IP addresses at the OfficeServ 7100 system side. One to expose
the MGI card(s) to the public Internet and a second one to be used for MP10/MP10a
communications.
3. A router with the ability to allow IP Reservations or IP Forwarding.
4. Use one of the 3 ways to connect a remote public ITP keyphone:
A static IP at remote ITP end OR
-
An ITP keyphone standalone using DHCP services from the ISP OR
-
An ITP keyphone behind a NAT router.
-
NOTE: If remote ITP has to traverse a firewall or NAT Router to communicate with the
MP10/MP10a/MGI, then set:
ISP
MP10/MP10A PUB
IP ADD
216.43.162.74
MGI PUB IP ADD
216.43.162.73
INTERNET IP ADD
LAN
2.6.22
Home Page
SPECIAL APPLICATIONS
PART 2 JANUARY 2009
MGI
MGI PVT IP ADD.
105.52.10.201
105.52.10.1
105.52.10.1
Table of Contents
MP10/
MP10/MP10A PVT IP
ADD.
IP address:
105.52.10.200