Samsung Office DECT 8000 Installation And Programming Manual page 57

Configuring the Console Terminal
The console terminal should be set up with the following parameters:
Emulation: VT-100/ANSI Compatible
!
ps: 9600
! B
Stop bit: 1
!
Data bit: 8
!
Parity bit: None
!
Flow control: None
!
On a PC, the software download procedure employs the HyperTerminal feature in Windows. This
is described next.
Downloading Software Using Windows HyperTerminal
Setting Up HyperTerminal
1. Switch on the PC and boot with Windows
2. Click [Start] at the bottom of the screen and select Program
Program Accessories
Terminal from the displayed menu.
3. When you see the following HyperTerminal window, click the Hypertrm icon
4. When you see the following <Connection Description> window, type a name for the connection
in the "Name" box (e.g. 8BSI) and select an icon from the icons displayed in the "Icon" box.
Then, click [OK].
.
95 or later
Communications (in later Windows versions). Select Hyper-
Accessories (in Windows 95) or
Hypertrm
icon
6–3