4.
Use a flat, smooth, and clean floor surface, with all debris or obsturctions removed to
avoid damage. Align the two rear panels and secure to each other with one bolt, flat washer,
and nut at each hole location (8 places).
5.
Place the base bottom stiffener on the bottom and secure with one bolt, flat washer,
and hex nut at each hole location (8 places). Attach the corner stiffeners on each end and
secure with one bolt, flat washer, and hex nut at each hole location (4 places).
6.
Attach the left-side and right-side panels to the rear base panels. Secure with the
bolt, flat washer, and nut at each hole location. 4 on each side plus 4 located at the corner
stiffeners.
15