Table of Contents
Advertisement
Quick Links
531
OWNERS MANUAL
MODEL
WVSW
VENTLESS
HOOD
For
CONVEYOR
WARMERS
Includes
INSTALLATION
USE & CARE
SERVICE
IMPORTANT: DO NOT DISCARD THIS MANUAL
This manual is considered to be part of the appliance and is to be given to the OWNER or
MANAGER of the restaurant, or to the person responsible for TRAINING OPERATORS of
this appliance. Additional manuals are available from your WELLS DEALER.
THIS MANUAL MUST BE READ AND UNDERSTOOD BY ALL PERSONS USING OR
INSTALLING THIS APPLIANCE. Contact your WELLS DEALER if you have any
questions concerning installation, operation or maintenance of this equipment.
p/n 305812 Rev. (-)
M531 012303 cps
Advertisement
Table of Contents
Related Manuals for Wells VENTLESS HOOD WVSW
Summary of Contents for Wells VENTLESS HOOD WVSW
- Page 1 Additional manuals are available from your WELLS DEALER. THIS MANUAL MUST BE READ AND UNDERSTOOD BY ALL PERSONS USING OR INSTALLING THIS APPLIANCE. Contact your WELLS DEALER if you have any questions concerning installation, operation or maintenance of this equipment.
-
Page 2: Warranty
Seller’s obligation under this warranty is limited to the repair of defects without charge by a Wells Mfg. Co. factory authorized service agency or one of its sub-service agen- cies. -
Page 3: Table Of Contents
PARTS & SERVICE CUSTOMER SERVICE DATA Thank You for purchasing this Wells Manufacturing Co. appliance. Proper installation, professional operation and consistent maintenance of this appliance will ensure that it gives you the very best performance and a long, economical service life. -
Page 4: Features & Operating Controls
FEATURES & OPERATING CONTROLS WVSW VENTLESS HOOD Fig. 1 Features & Operating Controls... -
Page 5: Agency Listing Information
ITEM DESCRIPTION CANOPY Removable canopies aid in vapor capture at entry and exit of the conveyor warmer. Canopies hang from mounting pins at each end of the hood. ELECTRICAL The hood plugs into a NEMA 5-15R (120V) or 6-15R (208/240V) receptacle with a 6' power cord. -
Page 6: Precautions & General Information
PRECAUTIONS AND GENERAL INFORMATION WARNING: Electric Shock hazard All servicing requiring access to non-insulated electrical components must be performed by a factory authorized technician. DO NOT open or remove the top panel. Failure to follow this warning can result in severe electrical shock. -
Page 7: Installation
UNPACKING & INSPECTION Carefully read all instructions in this manual before starting any installation. Carefully remove the hood from the carton. IMPORTANT: Appliance weighs 92 lbs (42.7 kg). Use appropriate care when removing from carton and installing on conveyor warmer. Remove all protective plastic film, packing materials and accessories from the hood before connecting electrical power or otherwise performing any installation procedure. - Page 8 INSTALLATION (continued) WARNING! Electric Shock hazard All servicing requiring access to non-insulated electrical components must be performed by a factory authorized technician. DO NOT open any access panel which requires the use of tools. Failure to follow this warning can result in severe electrical shock.
-
Page 9: Operation
OPERATING CONTROLS Controls include a lighted POWER SWITCH and an amber REPLACE FILTER indicator light. Press POWER SWITCH to ON anytime conveyor warmer is operating. When power is first turned on, the REPLACE FILTER light will glow. As the fan comes up to speed and air flow is established, the REPLACE FILTER light will go out. -
Page 10: Cleaning Instructions
CLEANING INSTRUCTIONS CAUTION! Personal Injury Hazard Disconnect power from hood and conveyor warmer before cleaning. IMPORTANT: DO NOT spill or pour water into controls, control panel or wiring. DO NOT spill or pour water into exhaust opening. DO NOT submerge hood in water or wash with water or steam spray. -
Page 11: Troubleshooting Suggestions
SYMPTOM No operation, no lights REPLACE FILTER light remains lit (never shuts off) If filters are clean and fan is operating If fan is not operating TROUBLESHOOTING SUGGESTIONS PROBABLE CAUSE Cord unplugged Circuit breaker off or tripped Damaged power cord or plug Damaged power switch Filters dirty New filter still in plastic wrapper... -
Page 12: Service Instructions
SERVICE INSRTUCTIONS IMPORTANT: VACUUM DIAGRAM DO NOT store anything on top of the hood. DO NOT block the exhaust opening. Filter operation is monitored by a vacuum switch and a system of vacuum hoses. The switch energizes the REPLACE FILTER light if airflow through the filters is insufficient for efficient operation. -
Page 13: Parts & Service
IMPORTANT: Use only factory authorized service parts and replacement filters. For factory authorized service, or to order factory authorized replacement parts, contact your Wells authorized service agency, or call: Wells Manufacturing Co. 2 Erik Circle P. O. Box 280 Verdi, NV 89439...