Shutter Control Unit Communications Commands; Communication-Controlled Operation; Communications System; Connector Specification - Nikon TIRF Instructions Manual

Shutter Control Unit Communications
1

Communication-controlled operation

You can control this system from your PC or other devices through the RS-232C interface.
Create your own control program based on the information given in this manual.

1-1 Communications system

Start-stop serial communication

1-2 Connector specification

The following signals are used with the system's serial interface connector:
D-sub 9-pin connector (male)
Pin No. Signal
1 Unused
2 RxD
3 TxD
4 Unused
5 GND
6 Unused
7 Unused
8 Unused
9 Unused
IV Shutter Control Unit Communications Commands
1 Communication-controlled operation
I/O
-
Input
Output
-
GND
-
-
-
-
- 29 -
IV
Commands
IV