Ricoh A850 Operating Instructions Manual page 60

Troubleshooting
Messages
Going Offline
The job has been Reset.
Functional Problem
SC2000
Printer HDD Error
Printer HDD cannot be
used.
Printer HDD Error
Press Reset to cancel the
current job
Parallel communication
7
Error
Network failure.
52
Description
The machine is shifting from
Online to Offline.
The current job has been re-
set.
A controller diagnostic error
or a controller exception er-
ror occurred while the pow-
er is on.
The printer controller has
some problems on the hard-
ware.
A controller disk error is de-
tected while the power is on.
A controller disk error is de-
tected while a macro or font
is being downloaded from
the host to the printer con-
troller.
A parallel communication
error occurred during the
print job via the parallel
port.
Network communication is
not available.
An installed network card
fails to correctly establish
communication with the
network.
Comments
Wait until it shifts to Offline.
Turn the main switch off,
and then back on. If the error
appears again, please call
service.
Even if this error occurs, oth-
er functions (Copy and Fax)
are still available.
Press {Continue} after con-
firming the error, and the
printer will start without the
controller disk capability.
Press {Reset} to cancel the
current job.
If this error often occurs ,
change the disk.
Press {Reset} to cancel the
print job, and check the par-
allel communication settings
again.
Press {Continue} and check
the network settings, and the
printer will start without the
network capability.
Even if a network card is in-
stalled, no error will occur
when it isn't plugged into a
network connection.