Ricoh A850 Operating Instructions Manual page 61

Messages
Print overrun
Memory overflow
Printer HDD is full.
Output tray is full.
Description
A print overrun occurred on
a file being printed. Only
part of the data on the page
will be printed, and the print
job is suspended.
Memory overflow occurred
during the print job. After
part of the data on the page
is printed, the print job is
suspended.
This is because the emula-
tion language sent a file too
complex for the printer to
interpret with the available
memory, or there isn't
enough memory space to
download the fonts.
A controller disk becomes
full while downloading a
macro or font from the host
to the printer controller.
The specified output tray of
the print job is full, and the
print job is suspended.
Error & Status Messages on the Operation Panel
Comments
To ignore this error, press
{Continue}, and the print job
will be resumed.
To cancel the print job, press
{Reset}.
After a few seconds without
any key press, the print job
will be canceled automatical-
ly.
To print the image correctly,
add memory to the machine,
or reduce the resolution of
the image and re-send the
print job.
To cancel the print job, press
{Reset}.
After a few seconds without
any key press, the print job
will be canceled automatical-
ly.
To print the image correctly,
add memory to the machine.
This message remains until
the next print job.
To cancel the print job, press
{Reset}.
After a few seconds without
any key press, the print job
will be canceled automatical-
ly.
To execute the operation cor-
rectly, clear room on the disk
partition priority.
Remove the output from the
output tray, and the print job
will be resumed automati-
cally.
7
53